Theoretical assessment of structural,mechanical, and thermodynamic properties of Pd2Al

The physical properties, namely structural, mechanical, and thermodynamic properties, of Pd₂Al intermetallic compound were explored through first-principles calculations within the framework of density functional theory. The calculated lattice constants were consistent with the available experimental data. The calculated elastic constants revealed that Pd₂Al was mechanically stable. By the predicted elastic constants, several related properties, namely Cauchy pressures, shear anisotropy factors, directional Young's modulus, bulk, shear and Young's moduli, the ratio of K/G, Vickers hardness, sound velocity, and minimum thermal conductivity for Pd₂Al were evaluated. According to the calculated results, it was found that Pd₂Al possesses a highly anisotropic feature and behaves in a ductile manner with low stiffness. Finally, temperature-dependence of thermodynamic properties, namely Debye temperature and heat capacity, were also evaluated through the quasi-harmonic Debye model.     

基于三次Bézier基函数插值的GM(1,1)模型背景值优化研究

本文研究了传统灰色GM(1,1)模型存在模型精度不高的问题.利用带形状参数的三次Bézier基函数,给出插值函数的表达式,并结合复化梯形公式,给定误差限的方法,获得了比传统灰色GM(1,1)模型更高精度的结果.推广了传统灰色GM(1,1)预测模型的结果.     

一类含时滞的比率依赖捕食系统正平衡点的全局稳定性分析

讨论了一种食饵增长为Gilpin-Ayala型的比率依赖的食饵捕食者模型,利用第二加性复合矩阵原理证明线性化系统正轨道解的稳定性,结合系统在凸集中存在唯一的局部正平衡点,证明了正平衡点的全局渐近稳定性.结合数值模拟验证了所得结论的合理性,同时指出定理结论仅为充分条件,丰富完善了模型的动力学性质.     

Colossal Stability of SiB11(BO)12−: An Implication as Potential Electrolyte in High-Voltage Alkali-ion Battery

High-voltage alkali metal-ion batteries (AMIBs) require a non-hazardous, low-cost, and highly stable electrolyte with a large operating potential and rapid ion conductivity. Here, we have reported a halogen-free high-voltage electrolyte based on SiB₁₁(BO)₁₂⁻. Because of the weak π-orbital interaction of −BO as well as the mixed covalent and ionic interaction between SiB₁₁-cage and −BO ligand, SiB₁₁(BO)₁₂⁻ has colossal stability. SiB₁₁(BO)₁₂⁻ possesses extremely high vertical detachment energy (9.95 eV), anodic voltage limit (∼10.05 V), and electrochemical stability window (∼9.95 V). Furthermore, SiB₁₁(BO)₁₂⁻ is thermodynamically stable at high temperatures, and its large size allows for faster cation movement. The alkali salts MSiB₁₁(BO)₁₂ (M=Li, Na, and K) are easily dissociated into ionic components. Electrolytes based on SiB₁₁(BO)₁₂⁻ greatly outperform commercial electrolytes. In short, SiB₁₁(BO)₁₂⁻-based compound is demonstrated to be a high-voltage electrolyte for AMIBs.     

羧酸甲乙酯中羰基17O-NMR化学位移研究

提出了计算羧酸甲乙酯中羰基¹⁷O-NMR化学位移的公式：δ_cal（¹⁷O）=360.0+Δα+Δβ+Δγ,通过线性回归法确定了22种取代基参数.经回归检验表明该公式计算结果置信度为99.5%,与实验值的偏差Δδ在5.0以内的羰基¹⁷O-NMR化学位移计算值~100%.     

用于可充电器件的有机电极材料

有机化合物作为可充电器件的电极材料可以通过自身电活性部位电荷状态的变化来实现本征的氧化还原反应。除了锂离子电池外,有机电极材料还可以用于其他离子半径更大的金属离子电池(如Na⁺、K⁺、Mg²⁺、Zn²⁺等)。有机电极材料还具有诸多优势,比如结构多样、成本低廉、资源丰富和可持续性高,易于通过适当的材料设计调整其性能等,已被证明在可充电器件中具有重要的应用潜力。然而,有机电极的实际应用仍需要解决一些关键问题,例如导电性差和在常规有机电解液中溶解等。本文介绍了各种具有不同氧化还原活性中心的有机电极材料及其反应机理,包括有机硫化物、有机自由基、亚胺类化合物、偶氮化合物和羰基化合物;重点总结了有机羰基化合物电极材料在性能改善方面的策略以及近5年在可充电器件中的应用;最后,讨论了有机电极材料需要应对的挑战以及未来的机遇。     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.     

Selective alcohol oxidation catalysed BY FeCl3 /novel glycine functionalised IONIC liquid

An effective and eco-friendly technique were designated for quick alcohol oxidation by glycine functionalised imidazolium ionic liquids in presence of FeCl₃ at ambient-temperature. No over the primary alcohols oxidation to carbonyl compounds was observed in presence of this FeCl₃/[Gmim]Cl. These benefits of the catalyst resulted mainly from the circumstance with alcohols-H₂O₂, and the Fe³⁺ was coordinated by the immobilized IL to permitted both reactants to access the active sites of the catalyst effectively. The catalyst recycled nine times without loss of activity.     

电催化醇选择性氧化为醛酮的研究进展

醇选择性氧化为相应的羰基化合物是有机化学中最常用的生成羰基化合物的反应,电催化氧化具有反应条件温和、环境友好等优点,是一种非常有前途的醇催化氧化绿色生产工艺。本文综述了直接和间接电催化氧化反应的方法,并对各类体系的催化效果进行了简要介绍。     

脱水Ni-Fe类水滑石的制备及其作为环保型催化剂用于生物质糠醛的高选择性缩醛化反应

合成了含硝酸根离子的脱水Ni-Fe类水滑石（Ni-Fe HTLCs）并将其应用于室温下的糠醛缩醛化反应。脱水Ni-Fe HTLCs对糠醛缩醛化反应显示出高选择性并基本实现糠醛的完全转化。作为耐水的路易斯酸和脱水剂,脱水Ni-Fe HTLCs被证明是适用于糠醛缩醛化反应的高效双功能催化剂。通过研究发现,脱除Ni-Fe HTLCs中水分导致颗粒收缩并增强层板间硝酸根离子间的电荷互斥,Ni-Fe HTLCs中弱酸性位点在糠醛缩醛化中发挥重要作用,脱水可改变酸性位点结构并增强其活性。脱水Ni-Fe HTLCs可吸收缩醛化反应中产生的大部分水分,但吸水后Ni-Fe HTLCs的结构并不能完全恢复,这可能是由扩散进入HTLCs层板间的有机分子导致。